HomeTechM2 Screw Sizes

M2 Screw Sizes

If you are looking for M2 screw sizes, there are many options available. These are all made from metric threads and come with strict specifications for diameter and length.

Asus M2 screw is a small package

When it comes to installing an M.2 SSD, Asus has come up with a unique solution. Rather than relying on screws, the company has opted to go with a plastic latch, which consists of a ring-shaped piece of plastic, and a corresponding screw. It may sound silly, but the ring-shaped bit will hold your M.2 snugly, and the screw can be used with any brand of hard drive.


The Q-Latch isn’t available on Asus’ most expensive boards, but it can be found on the Z590 and B560. The plastic lever is easy to use, and the corresponding screw can hold your M.2 snugly and securely. It’s not hard to see why Asus is so excited about this solution.


The Q-Latch is a smart move, but it isn’t the only clever thing Asus has done to make mounting M.2 drives easier. For example, the plastic retaining lever isn’t just about holding your SSD snugly – it also has a handy thumb grip, so you can tinker with your configuration without needing a screwdriver.


Metric threads are manufactured according to strict specifications


A Metric thread is an internationally standardized screw thread. It is distinguished from other types of threads by its 60-degree profile and flank angle.


ISO (International Organization for Standardization) specifications are used to manufacture metric threads. This includes defining its form and tolerances.


The main purpose of these standards is to make it possible to interchange mating components in a safe way. They also provide information on gauging, machining, and inspection.


Thread profiles other than ISO metric screw threads are typically used in certain regions. Some are for backwards compatibility and others for special applications.


The ISO metric thread type is commonly used in Europe and some other countries. Unlike inch-based threads, metric threads are manufactured according to strict specifications. These threads are available in different pitch sizes.


Pitch is the distance between the crests of the adjacent threads. The size of the pitch depends on the metric thread type. Fine and superfine pitch metric threads are common in the aviation and automotive manufacturing industries.


Imperial countersunk socket screws are available in diameters of #0 to 7/8 inch


Socket countersunk socket screws are a class of machine screws. They are available in various sizes and materials. These include steel, stainless steel, aluminum and titanium. The design of these screws is similar to hex cap screws. However, the head is slightly smaller in diameter. This is designed to facilitate installation in countersunk holes.


Socket countersunk screws have a number of other features. For example, they are manufactured to the standard thread length required for their respective applications. Unlike hex cap screws, they are less susceptible to fatigue due to the internal wrenching of the threads. Plus, they are designed to sit nicely on their surfaces.


Another notable feature is the 82-degree angle of the flat top surface. This angle is a good idea for certain parts that have high hardness. If the top of the screw or bolt needs to be flush, this angle is ideal.


Although the countersunk hole has a lot of uses, it is generally considered a good idea to keep the diameter of the hole below F (maximum). In addition, the hole should be designed to prevent the sharp edges from deforming fillets.


Imperial countersunk socket screws are manufactured according to a minimum specified thread length


There are many standards that govern the material properties of imperial sized externally threaded fasteners. These include ASME B18.3, British Standard Whitworth, ASTM A354, and ASTM F593. However, there are some differences between the systems and the types of screws. Some systems specify screw dimensions, while others are used to define the material of the fastener.


Most systems specify the minimum and maximum length of the screw. They also specify the strength and material of the joint. For instance, a socket head cap screw should be made from an austenitic corrosion-resistant steel. The screw shall have a tensile strength of at least 80,000 psi for sizes up to 5/8 in.


Socket head cap screws should have a flat, slightly concave point. Several different types of socket head are available. They are designed to be used with Allen keys and wrenches. You can also get them in stainless steel, alloy steel, or aluminium.


To determine the minimum size, measure the distance from the bearing surface of the head to the threading. You must measure the length from the extreme point to the last complete thread. Also, a total runout of 0.006 inches is required.

latest articles

explore more


Please enter your comment!
Please enter your name here